DSH 624A（GENERALITY）濕熱處理的環境條件能否統一？

Subject: Humidity test requirements

Question:

Various IEC standards have requirements for humidity / temperature conditioning, but have different specifications for the test conditions.

- IEC 60065 – 93% +/- 3% (t 20-30℃ +/- 2℃ or 40℃ +/- 2℃);

- IEC 60950-1 – 93% +/- 3% (t 20-30℃ +/- 2℃ or 40℃ +/- 2℃);

- IEC 60601-1 – 93% +/- 3% (t 20-30℃ +/- 1℃);

- IEC 61010-1 – 93% +/- 3% (t 40℃ +/- 2℃);

- IEC 60335-1 – 93% +/- 3% (t 20-30℃ +/- 1℃).

There does not seem to be a technical justification for the differencies in the specifications. Accordingly, it is suggested and recommended that the humidity / temperature specifications in the above standards be consistent.

Decision:

The chamber is to be set at 93% RH, with +/- 3% RH tolerance, at a convenient temperature between 20℃ and 30℃ or an appropriate higher temperature when required by the specific product standard, but the chosen temperature to be kept within +/- 2℃ during the test.

The standard specifications for the humidity are to be met at the reference / measuring point, where the controlling humidity sensor is located.

問題：

各IEC標準都對濕度/溫度調節有要求，但對測試條件有不同的規范。

- IEC 60065    – 93% +/- 3% (t 20-30℃ +/- 2℃ or 40℃ +/- 2℃);

- IEC 60950-1 – 93% +/- 3% (t 20-30℃ +/- 2℃ or 40℃ +/- 2℃);

- IEC 60601-1 – 93% +/- 3% (t 20-30℃ +/- 1℃);

- IEC 61010-1 – 93% +/- 3% (t 40℃ +/- 2℃);

- IEC 60335-1 – 93% +/- 3% (t 20-30℃ +/- 1℃)。

標準差異似乎沒有技術理由。

因此，建議和推薦上述標準中的濕度/溫度條件保持統一。

決定：

環境設置在93%RH，具有+/-3%RH容差，在20℃至30℃之間的合適溫度或特定產品標準要求的更高溫度，但在測試過程中要保持在所選溫度的±2℃以?xún)?nèi)。

在控制濕度傳感器所在的參考/測量點達到濕度的標準條件。

提示：

決議大意是兩個：

1、沒聲明更高要求時，按對應標準條件作為默認條件；

2、濕度測量點以傳感器所在位置為準。

點擊下方名片，關注“朱大俠的質檢江湖”微信公眾號，一起來研究安規吧~